Teledyne M201E Manual do Utilizador descarregar pdf (Página 39)

Teledyne API Model M201E NH

Analyzer Operator Manual Maintenance Schedule

05206H DCN5910 37

4.3 REPLACING THE THERMOCOUPLE

The following instructions provide the necessary information to replace the

existing thermocouple. Figure 4-2 is provided for reference.

You must obtain the following replacement parts kit from T-API:

 010820000 , Type K thermocouple

You will need the following tools:

 Nutdriver,

 Diagonal Cutter

 Philips head Screwdriver #2

CAUTION

Avoid damage to the unit: use only Type K thermocouple in

the M501 NH

, converter. It can be distinguished by its wire

colors: red and yellow. If you have any other thermocouple,

do NOT install it; call T-API to obtain the correct part.

Figure 4-2. Thermocouple Location

Once you have the right tools and parts, replace the thermocouple as follows:

1. Ensure power is removed from the

M501 NH

, Converter. If the Converter has

been operational you will need to wait for at least 2 hours for the Converter oven to

cool before continuing with the replacement of the thermocouple.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

Sem comentários

Teledyne M201E Manual do Utilizador Página 39