Teledyne 201A Manual do Utilizador descarregar pdf (Página 13)

Teledyne API Model 201A NH

Analyzer Instruction Manual, 04689, Rev. B1

Table 2.3 - Span Calibration Procedure - Span Gas thru Sample Port

Step No.

Action Comment

1. Press CAL The M201A enters the calibrate mode. Input NO span

gas through the sample port.

2. Press

CAL-CONV-SET

Set the converter efficiency parameter to 1.0000, then

press ENTR-EXIT.

2. Wait 20 min Wait for reading to stabilize at span value.

3. Press SPAN If you change your mind after pressing SPAN, you can

still press EXIT here without spanning the instrument.

4. Press ENTR Pressing ENTR actually changes the calculation

equations and causes the instrument to read the TN

and TNx span concentrations.

5. Press EXIT M201A returns to sampling. Immediately after

calibration, data is not added to the DAS averages.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Sem comentários

Teledyne 201A Manual do Utilizador Página 13